Xpression Pet
Seachem De-Nitrate - Nitrate Remover [Water Conditioners] 34 oz
Seachem De-Nitrate - Nitrate Remover [Water Conditioners] 34 oz
PRODUCT DETAILS
• Product Size/Qty: 34 oz
• Product Count: 1
• Manufacturer: Seachem
• Pet Category: Water Conditioners
• Product Category:
SeaChem De-Nitrate removes nitrates, nitrites, ammonia, and organics from both freshwater and marine aquariums. The high porosity of De-Nitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts.
* Removes nitrates, nitrites, ammonia and organics
* Supports growth of beneficial bacteria that eliminate toxins
* Suitable for fresh and saltwater tanks
Even when exhausted as an organic adsorbent, SeaChem De-Nitrate continues to be an excellent support for the biological filter and does not have to be removed.
Directions: Place De-Nitrate to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once De-Nitrate has been used for several days, nitrate concentrations should start to fall and level off gradually at a concentration of 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of De-Nitrate treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.